News

An Insight into laser rust removal technique

Because it works so well, laser cleaning has quickly become a hot topic in almost every industry. Laser rust removal gun is one of the many types of laser cleaning. Laser cleaning is a very effective way to clean metal parts. Fiber laser cleaning has a lot of benefits, but the biggest one is that it can get rid of rust and other dirt quickly and without hurting the material underneath. You can also buy a laser rust remover and follow the instructions to get rid of the rust yourself.

With this method, rust can be taken off more precisely and for less money. It’s also probably the best way to have a more negligible effect on the environment. Most of the time, using a laser to get rid of rust is better than using chemicals or cleaning by hand.

Why using a laser to clean is a good idea?

Laser technology to get rid of rust has become more popular over the past few years, and there is a good reason for this. The following things can be done with laser technology:

Environmental-Friendly

Chemicals and materials are usually used to get rid of rust, but laser cleaning is different. In reality, this is the only way to meet environmental protection standards. It lets you get rid of consumables and makes your organization better for the environment.

A simple dust extraction system can eliminate the small amount of dust that the space sends out into the air.

It gets rid of the need for manual labor.

Every metal part has to be cleaned by hand, which takes time, work, and money. Since machines can fully or partially do laser cleaning, these costs can be avoided.

It cuts down on how often and how much repairs cost.

When abrasive blasting is used, it needs to be taken care of regularly. Because there are so many things that could cause it, like sand, you must always be on the lookout. On the other hand, laser rust treatment is a non-contact method that removes rust all the time and cuts down on maintenance costs.

Safety

Laser cleaning is a safe way for employees to work because it doesn’t involve touching anything. Even without personal protective equipment, a person’s body, hearing, and breathing can be kept safe (PPE). Plus, they don’t deal with anything dangerous.

A Complete Guide on How to Get Rid of Rust

No matter what kind of substance you’re dealing with, it won’t always act the same way in the same situation. In this situation, it is called the “ablation threshold.” There must be a low level of intensity in the JNCTLASER beam to clean the surface well. After that, the heat made by getting rid of the rust leads to the energy being released as heat.

The only thing left is a clean surface, and the surface underneath has not been changed. How quickly the rust can be removed depends on how deep it is and how intense the laser is.

Case studies and uses of lasers for cleaning

A wide range of businesses worldwide uses laser cleaning to do a wide range of different tasks. It can be used in several ways before welding, such as a pre-wedding treatment. To improve the yield strength, tensile strength, and fatigue life of a weld, the surface of the weld needs to be cleaned of any dirt or rust. As a result of this process, welds become less porous.

As a pre-coating treatment, it removes the oxides on the metal so that the paint you put on your parts after welding sticks well. This is why laser cleaning is an excellent way to get high-quality parts because it gets rid of rust well.

Leave a Reply

Back to top button